5. HRView Operating Guide | HRView Function Manual |
5.3. Communication Setup and Connection
Click 
, and communication setup dialog box will appear.
Fig 5.3 Communication setup dialog box
①Click 
to control the connection status. If this button is pressed, this means connected status. If not, this means disconnected status.
②As to
the controller) on the left in the disconnected status, click 
button, and
click 
to end. Cable should be connected to the communication port.
③As to Ethernet, enter IP address and port number in the disconnected status, click
button, and click 
to end. IP addresses and port numbers of
many controllers can be managed by using list box, 
and 
.