IBM AT-FS201, AT-FS202SC/FS2, AT-FS202SC/FS4, AT-FS202SC/FS1, AT-FS202SC/FS3 Description, Chapter

Models: AT-FS202 AT-FS202SC/FS3 AT-FS201 AT-FS202SC/FS1 AT-FS202SC/FS4 AT-FS202SC/FS2

1 44
Download 44 pages 16.08 Kb
Page 9
Image 9
Chapter 1

Chapter 1

Description

The AT-FS20x and AT-FS202SC/FSx Series Switches include the following models:

AT-FS201

AT-FS202SC/FS2

AT-FS202

AT-FS202SC/FS3

AT-FS202SC/FS1

AT-FS202SC/FS4

The AT-FS20x Series switches are designed to extend the distance of your network by converting Fast Ethernet data between twisted-pair cabling and either multimode or single-mode fiber optic cabling. These dual-port switches can also be used to improve the performance of your network by dividing it into smaller, more manageable segments.

Each switch features a 100Base-FX fiber optic port and a 10Base-T/ 100Base-TX twisted-pair port. The fiber optic port has either a SC or ST connector and a maximum operating distance of 2 kilometers (1.2 miles) to 100 kilometers (62 miles), depending on the model. The twisted-pair port has an RJ-45 connector with a maximum operating distance of 100 meters (328 feet).

The fiber optic port operates at 100 Mbps, while the twisted-pair port operates at 10 Mbps or 100 Mbps. Both ports feature half- and full-duplex operation.

All of the AT-FS20x Series switches can be installed on a desktop or in an AT-MCR12 chassis. These switches are easy to install and do not require software configuration or management. This guide provides installation instructions for installing the AT-FS20x Series Switches on a desktop. To install the switches in an AT-MCR12 chassis, see AT-MCR12 Chassis Installation Guide (PN 613-10725-00).

1

Page 9
Image 9
IBM AT-FS201, AT-FS202SC/FS2, AT-FS202SC/FS4, AT-FS202SC/FS1, AT-FS202SC/FS3 manual Description, Chapter