IBM manual Non-TME Adapters, IBM Tivoli Enterprise Console Adapters Guide

3.If the endpoint has logged into a Tivoli Management Framework gateway successfully, create and distribute the ACP profile (see the IBM Tivoli Enterprise Console User’s Guide for details). Check the lcfd.log file if there are further problems; you can also turn on tracing at the Tivoli Management Framework gateway and look in $DBDIR/gatelog for further debugging information.

4.If events do not arrive at the event server but are not incorrectly parsed, check to see if the events are caching on the endpoint instead. If so, either the lcfd process cannot communicate to the Tivoli Management Framework gateway or the event server, or the lcfd process itself is down. Verify that all communications among the event server, Tivoli Management Framework gateway, and endpoint are working.

5.Source the endpoint environment, then use the endpoint wpostemsg command from the system the adapter is running on to see if the event arrives at the event server. See the IBM Tivoli Enterprise Console Reference Manual for more information.

Non-TME Adapters

Use the postemsg command from the system on which the adapter is running to see if the event arrives at the event server. The postemsg command works in environments where Tivoli software is not installed. Thus, this standalone command displays error messages in English only, because the command does not have access to the message catalogs for the language support packs. See the IBM Tivoli Enterprise Console Reference Manual for more information.

22IBM Tivoli Enterprise Console: Adapters Guide