IBM Enterprise Console Agent-independent Data, SYNTAX INTEGER 0..4294967295 ACCESS not-accessible

BEGIN
IMPORTS
enterprises	FROM RFC1155-SMI
OBJECT-TYPE	FROM RFC-1212
TRAP-TYPE	FROM RFC1215;

-- Network Computing Inc.

nci OBJECT IDENTIFIER ::= { enterprises 768 } -- LANAlert alert packets

lanalert OBJECT IDENTIFIER ::= { nci 2 } -- Agent-independent data items

lanalert-data OBJECT IDENTIFIER ::= { lanalert 2 }

--(NOTE: Some MIB processors have problems with the definition

--of lanalertFSA-NW2; this can be commented out if no

--NetWare 2.x File Server Agents are in use.)

lanalert-agent OBJECT IDENTIFIER ::= { lanalert 3 } lanalertFSA-NW2 OBJECT IDENTIFIER ::= { lanalert-agent 0 } lanalertFSA-NW3o OBJECT IDENTIFIER ::= { lanalert-agent 1 } lanalertNA OBJECT IDENTIFIER ::= { lanalert-agent 2 } lanalertFSA-NW4o OBJECT IDENTIFIER ::= { lanalert-agent 3 } lanalertAFG OBJECT IDENTIFIER ::= { lanalert-agent 4 } lanalertFSA-NT OBJECT IDENTIFIER ::= { lanalert-agent 6 } lanalertSNMPMon OBJECT IDENTIFIER ::= { lanalert-agent 7 } lanalertMS OBJECT IDENTIFIER ::= { lanalert-agent 10 } lanalertFSA-NW3 OBJECT IDENTIFIER ::= { lanalert-agent 50 } lanalertFSA-NW4 OBJECT IDENTIFIER ::= { lanalert-agent 51 }

Agent-independent Data

LANAlert alerts are assigned one of five priorities, from 1 (highest) through 5 (lowest). The following values are used for the specific-trap field of AFG Trap protocol data units (PDU) to represent the various priorities on set-alert and clear-alert messages. Pre-2.4.0 Management Servers do not identify the alert priority when sending clears, so the value clear-unknownis used as the specific-trap number in this case. Otherwise, one of the values clear-1through clear-5is used to communicate the priority of a clear-alert message.

LANAlertPriority ::= INTEGER { set-1(1), set-2(2), set-3(3), set-4(4), set-5(5), clear-unknown(6), clear-1(7), clear-2(8), clear-3(9), clear-4(10), clear-5(11)

agentName OBJECT-TYPE

SYNTAX DisplayString (SIZE (1..15)) ACCESS not-accessible

STATUS mandatory

DESCRIPTION

"The name of an agent reporting to a management server." ::= { lanalert-data 1 }

nodeName OBJECT-TYPE

SYNTAX DisplayString (SIZE (1..15)) ACCESS not-accessible

STATUS mandatory

DESCRIPTION

"The name of a node on the monitored network." := { lanalert-data 2 }

eventID OBJECT-TYPE

SYNTAX INTEGER (0..4294967295) ACCESS not-accessible

90IBM Tivoli Enterprise Console: Adapters Guide