Chapter 2. Using the projector
This chapter describes how to use and make adjustments to the projector. It
also provides a reference to the keypad, remote control buttons and the
options that are available from the on-screen menus.

Basic image adjustment

To adjust the image, do the following:
vMake sure that you have turned on your equipment in the correct order.
See “Starting the projector and adjusting the image”on page 10.
vIf the image is not displayed completely, zoom the image, adjust the height
of the projector, or center the image by adjusting its horizontal or vertical
position. Be sure the projector is at a 90-degree angle to the screen. See
‘‘horizontal position on page 21 and ‘‘veritcal position’’ on page 22.
vIf the image is out of focus, rotate the focus lens.
vIf the colors do not display correctly, adjust the brightness, contrast, tint or
color. See “Display menu”on page 19.

Adjusting the projector

To focus the image, rotate the focus ring 2(see the following illustration)
until the image is clear. Toadjust the image size, rotate the zoom ring1.
Note: To obtain the best overall focus quality, open a menu and focus the text.
This will ensure that the best overall image quality is achieved. See
“Menu/select”on page 16 for information on opening a menu.
© Copyright IBM Corp. 2001 13