Replacing the projection lamp
WARNING:
To avoid burns, allow the projector to cool for at least 30 minutes before
you open the lamp access grill. Never extract the lamp module while the
projector is operating.
The lamp hour counter in the Status menu counts the number of hours the
lamp has been in use. Change the lamp when the brightness is no longer
acceptable. You can order new lamp modules. See ‘‘Accessories’’ in Appendix
A for ordering information.
Follow these steps to replace the projection lamp:
1. Turn off the projector by unplugging the power cord.
2. Wait 30 minutes to allow the projector to cool thoroughly.
3. Insert a small screwdriver or other flat object into the slot near the front
of the projector. Slide the screwdriver toward the back of the projectorto
disengage the lamp access grill, then slide the lamp access grill off (away
from the lens.
30 iL1210 IBM MicroPortable Projector: User’s Guide