Using the on-screen menus
The projector has menus that enable you to make image adjustments and
change a variety of settings. These adjustments are not available directly from
the keypad.
Note: Some menu items might be unavailable at certain times (grayed out or
dimmed). This indicates that the item is not applicable to your setup
(for example, video standards do not apply to computer sources) or the
item is not enabled until another selection is made.
To open the on-screen menus, press the Menu/Select button on the keypad or
remote. The menus automatically close after 30 seconds if no buttons are
pressed. This displays the Main menu and changes the source and reset
buttons on the keypad to menu navigation buttons. Press the down arrow
button to move the cursor down and press the up arrow button to move the
cursor up. The selected menu is highlighted.
To change a menu setting, use the up and down arrow buttons to move the
cursor up and down to the item you want to change (the selected item is
highlighted), then press Menu/Select. When an item is selected, the button
appears depressed to provide a visual indication of the selection.
Use the up and down arrows to adjust the setting or turn it on and off. Press
Menu/Select when you are done. Press the up and down arrows to move to
another setting. When you complete your adjustments, navigate to Exit, then
press Menu/Select. You arereturned to the top of the Main menu. Press
Menu/Select again to exit the Main menu, or navigate to another submenu.
18 iL1210 IBM MicroPortable Projector: User’s Guide