Using the keypad and remote control buttons
While the menus are displayed, the Source and Reset buttons on the keypad
act as menu navigation and adjustment buttons, and the menu/select button
acts as a select button. See “Using the on-screen menus”on page 18 for
details.
data
video
keystone
forward
backward
menu/select
menu/select
source
reset
®
Menu/select
Press the Menu/Select button to open the on-screen menus. Press
Menu/Select again (while Exit is highlighted) to close the menus. (The menus
automatically close after 30 seconds if no buttons are pressed). When you
close the menus, the projector saves any changes you made. For more
information about the on-screen menus, see “Using the on-screen menus”on
page 18.
Source (keypad only) or data and video (remote control only)
When you have more than one source (computer and video) connected to the
projector, select between them by pressing the Source button on the keypad or
the Data or Video button on the remote control.
Note: If you have turned Auto Source off, you might need to press the source
button more than once to display an active source. The sources switch
in this order: data analog, data digital, S-video, and composite video.
Reset (keypad only)
Use this option to reset the options in the menus (except Language, Video
Standard, and Rear Projection) to their original settings.
16 iL1210 IBM MicroPortable Projector: User’s Guide