Status menu
This is a read-only menu for informational purposes. To display the Status
menu, highlight Status from the Main menu, then press Menu/Select.
Lamp hours used
Indicates how many hours the current lamp has been in use. The counter
starts at zero hours and counts each hour the lamp is in use. Replace the bulb
when the brightness is no longer acceptable. See “Replacing the projection
lamp”on page 30 for details.
Computer resolution
Shows your computer’s resolution setting. To change this, go to your
computer’s Control Panel and adjust the resolution in the Display tab. See
your computer’s user’s guide for details.
Source
Indicates the active source, Data-Analog, Data-Digital, Composite video, or
S-video.
Version
Indicates the projector software version. This information is useful when
contacting Technical Support.
Chapter2. Using the projector 25