IBM Netcool/OMNIbus Probe for Nortel CNM manual Properties and command line options, Property name

Properties and command line options

Table 5 describes the properties and command line options specific to this probe. For information about generic probe properties and command line options, see the IBM Tivoli Netcool/OMNIbus Probe and Gateway Guide, (SC23-6387).

Table 5. Properties and command line options (1 of 4)

Property name	Command line option	Description
AckSystemId string	-acksystemid	Processing system on which the IRP
	string	Manager runs. This is used by the
		acknowledge_alarm CLI function.
		The default is "".
AckUserId string	-ackuserid string	Name of the user acknowledging the
		alarm. This is used by the acknowledge_
		alarm CLI function.
		The default is "".
Agentheartbeat	-agentheartbeat	Frequency (in seconds) with which the
integer	integer	probe checks the status of the IRP agent.
		The default is 60.
AlarmFilter string	-alarmfilter	Filter the alarm IRP uses to limit the alarms
	string	sent to the probe.
		The default is "".
AlarmIrpName	-alarmirpname	Name of the Alarm IRP Agent.
string	string	The default is 32.111-3 V6.5.
ClearSystemId	-clearsystemid	Name of the IRP Manager that supports the
string	string	user who clears the alarms using the CLI.
		It can be used to identify the system, such
		as system 6, or it can contain no
		information such as "".
		The default is "".
		For more information on CLI, see
		"Command line interface" on page 7.
ClearUserId string	-clearuserid	Name of the user clearing the alarms used
	string	by the CLI function of the probe.
		The identity can be a human operator such
		as "John Smith", or a group such as
		"Team Six", or it can contain no
		information such as "".
		The default is "".
		For more information on CLI, see
		"Command line interface" on page 7.

Probe for Nortel CNM 11