20Nortel 10 Gigabit Uplink Ethernet Switch Module: Installation Guide

2.Read the information in “Handling an XFP or SFP module” on page 15.

3.Remove any cables attached to the SFP module.

4.Unlock the SFP module by pulling the wire tab straight out and up as shown in the following illustration.

Wire tab

SFP module

5.Grasp the wire tab on the SFP module and pull it out of the SFP module port.

6.Place the SFP module into a static-protective package.

20Nortel 10 Gigabit Uplink Ethernet Switch Module: Installation Guide

Page 30
Image 30
IBM manual Nortel 10 Gigabit Uplink Ethernet Switch Module Installation Guide