IBM Nortel 10 manual v 9600 baud v 8 data bits v No parity v 1 stop bit v No flow control

2.On the management station, open a console window and make sure that the serial port is configured with the following settings:

v 9600 baud

v8 data bits

vNo parity

v1 stop bit

vNo flow control

3.Type the user name and password. The default user name is admin. The default password is admin.

The serial port is compatible with the standard 16550 Universal Asynchronous Receiver/Transmitter (UART) protocol. The RS-232 serial port is enabled by default.

Configuring the GbE switch module using the switch-module Browser Based Interface

This section describes how to use the GbE switch module Browser Based Interface (BBI) to access and configure the internal switching software. For more information on the BBI, see the Nortel 10 Gb Uplink Ethernet Switch Module for IBM BladeCenter Browser Based Interface Quick Guide.

This section also describes some of the Web interface switch-module management features.

The GbE switch module offers an embedded HTML, browser-based interface that you can use to manage the switch through Netscape Navigator and Communicator, or Microsoft® Internet Explorer. This interface is enabled by default. The browser-based interface acts as an access tool and can

30Nortel 10 Gigabit Uplink Ethernet Switch Module: Installation Guide