8.Click Next on Driver Files Search Results.
9.If The Digital Signature Not Found window opens, click Yes to continue.
10.When installation of the PCI Ethernet Controller completes, click Finish.
11.Click Start→Run.
12.Type x:\modem\win2K\setup.exe where x is the drive letter of the
13.Click OK on Do you want to install the modem driver?
14.If the Digital Signature Not Found window opens, click Yes to continue. The Lucent Win Modem driver will complete loading.
Installing the Ethernet and modem device drivers in Windows 98
To install the PCI Ethernet Controller device driver and the Lucent Win Modem device driver in Windows 98, do the following:
1.Start Windows 98. The Add New Hardware Wizard window opens for the PCI Ethernet Controller.
2.Click Next.
3.Insert the Intel Driver CD into the
4.Select Search for the best driver for your device (Recommended).
5.Click Next. You are prompted to select the locations from where you wish to search for new device drivers.
6.Select Specify a location and specify x: where x is the driver letter of the
7.Click Next.
8.Select The Updated Driver (Recommended) and click Next.
9.If the displayed driver is Intel PRO/100 SP Mobile Combo Adapter, click Next; otherwise click Back and repeat Step 8.
10.At the Insert Disk window, click OK.
11.In the Copying files from the pulldown menu, select the
12.Click Finish to complete the installation of the PCI Ethernet Controller device driver.
13.Click Yes to restart your computer.
14.When the computer restarts and the Wizard finds the PCI Serial Controller, click Cancel.
15.Click Start→Run. Type x:\modem\win9x\setup.exe where x is the drive letter of the
16.Click OK on Do you want to install the modem driver?
Part 1: Installation and user’s guide |
