IBM PRO/100 SP manual AT command summary, Command Description

Table 3: Supported Functions

Separate Homologation Country parameters in binary file [Except OS/2]

CLKRUN# support. CLKRUN# should not be asserted if no data transaction for modem (or LAN)

NT 4.0 APM Support through TP port DD for Windows NT 4.0 with the latest service pack

Note: Meter Tone (billing tone) filtering for Switzerland and Germany is not included and must be provided by the user.

AT command summary

The following tables summarize the commands implemented by the modem. Commands may be executed when the modem is in COMMAND mode. COMMAND mode is entered upon under one of the following conditions:

vAfter restart

vAt the termination of a connection

vAfter the execution of a command other than dial or answer commands (ATO or AT&T)

vUpon the receipt of the ESCAPE SEQUENCE (three consecutive characters matching the contents of S register 2) while on-line mode

vUpon the on-to-off transition of DTR if & D1, D2 or &D3 has been set

Table 4: AT Command Set Summary. The following table is from Lucent Technologies, Host-Based Controller Modem AT Command Set, Version 1.1, June 15, 1998.

Command	Description	Command	Description
A/	Repeat last command	&J	Auxiliary relay options
A	Answer command	&K	Local flow control selection
B	Communication	&M	Asynchronous communications
	standard		mode
C	Carrier control	&Q	Asynchronous communications
			mode
D	Dial command	&S	Data set ready (DSR) option
E	Echo command	&T	Self-test commands
F	On-line data character	&V	View the active configuration
	echo command
H	Hook control	&W	Store current configuration
I	Request ID	&Y	Select stored profile for hard
	information		reset
L	Monitor speaker	&Z	Store telephone number
	volume

B-2Intel® PRO/100 SP Mobile Combo Adapter: User’s Guide