21.Type x:\modem\winnt\setup.exe where x is the drive letter of the CD-ROM drive.

22.Click OK on Do you want to install the modem driver? After the Lucent Win Modem driver installs, click OK to restart your computer.

23.Exit Windows Explorer and restart to complete installation of the Lucent Win Modem driver.

Using the modem abroad

This section provides information for using the modem outside your country. For the list of regions which support the use of the Combo card, see the online information on your computer.

Setting up the dialing properties

When you use the Combo card outside of the country where it was set up, reset the dialing properties, as follows:

1.Click Start and move the cursor to Settings; then click Control Panel.

2.Double-click Modem.

3.Double-clickDialing Properties.

4.In the Country/Region section, select the region where you are going to use the modem.

The regions where IBM supports the use of your modem are listed in the online manual. If you select a region not on that list, your modem might not work correctly.

Performing an Unattended Install

Unattended installation procedures are available for:

vWindows 2000

vWindows 95/98

vWindows NT 4.0

To perform an unattended install, refer to the online User’s Guide located on your Intel CD and select the topic called Windows Push Installation.

Additional setup and configuration

The PRO/100 adapter supports a wide range of advanced networking features. Such features are fully described in the online User’s Guide located on your Intel CD. To view the guide, insert the Intel CD in your computer and wait for the Autorun window to open. Click the User’s Guide button to start your Web browser and view the guide.

Part 1: Installation and user’s guide

1-7

Page 15
Image 15
IBM PRO/100 SP manual Using the modem abroad, Setting up the dialing properties, Performing an Unattended Install