Installing the Ethernet and modem device drivers in Windows Me
To install the PCI Ethernet Controller device driver and the Lucent Win Modem device driver in Windows Me, do the following:
Note: Use the Add New Hardware Wizard for installing only the PCI Ethernet Controller. See instructions below.
1.Start Windows Me. The Add New Hardware Wizard window opens and indicates that the PCI Ethernet Controller was found.
2.Insert the Intel Driver CD in the
3.Make sure that Automatic search for a better driver (Recommended) is selected and click Next. Windows installs the device driver from the CD. The Wizard window displays the adapter name, and indicates it has finished installing the new device driver.
4.Click Finish to complete the PCI Ethernet Controller device driver installation, and click Yes to restart the computer.
5.When the computer restarts and the Wizard finds the PCI Serial Controller, click Cancel.
6.Click Start→Run and then type x:\modem\winme\setup.exe where x is the drive letter of the
7.Click OK on Do you want to install the modem driver?
The Installing Modem Drivers displays and the Wizard finds a Lucent Win Modem.
8.Restart the computer to complete the Lucent Win Modem installation.
Installing the Ethernet and Modem device drivers in Windows 2000
To install the PCI Ethernet Controller device driver and the Lucent Win Modem device driver in Windows 2000, do the following:
1.Start Windows 2000.
The Found New Hardware Wizard window opens.
2.Click Cancel. The window opens for the Ethernet Controller.
3.Insert the Intel Driver CD into the
4.Click Next. The Ethernet Controller window opens.
5.Select Search for a suitable driver for my device (Recommended).
6.Click Next.
7.Select
