Extron electronic HSA 822 Packaging for Shipment, Cont’d, Figure B-3 Installing protective strips

Packaging for Shipment, Cont’d

4.	Place the enclosure and clamshell rightside-up on a
	horizontal surface. To protect the finish, place the
	enclosure on a soft cloth or rubber mat.
5.	Install the rubber strips that protect the flanged edges of
	the top of the surface enclosure (figure B-3).

Figure B-3 — Installing protective strips

6. Release (extend) the top panel.

7. Insert the HSA 822 and the clamshell into one of the foam shells (figure B-4). Either open end of the clamshell and the open top panel will fit into the recesses in the foam.

Figure B-4 — Installing the foam shell

8. Insert the opposite end of the HSA 822 and the clamshell into the remaining foam shell (figure B-5). Firmly push the foam shells together as far as they will go to completely suspend the HSA and clamshell. The sides of the clamshell protrude through slots in the foam.

Figure B-5 — HSA suspended in the foam

B-4 HSA 822 Hideaway® Enclosure • Packaging for Shipment HSA 822 Hideaway® Enclosure • Packaging for Shipment B-5