dsh -a /usr/lpp/ssp/css/rc.switch
Note: When working with a two-plane SP Switch2 system, add the adapter name to the command, as
follows: dsh -a /usr/lpp/ssp/css/rc.switch -a
<adapter_name>
Example:
dsh -w fr2n03,fr2n04,fr3n01 /usr/lpp/ssp/css/rc.switch
Attention: Issuing this command on processor nodes that did

not

lose a connection may cause
unpredictable results.
3. Have customer start the switch code from the control workstation by entering:
Estart
4. Check /var/adm/SPlogs/css0/p0/out.top file on the primary node.
5. Go to “Step 0620-001” on page1-17 to verify that there are no other switch problems.
Switch Function (MAP 0620)
1-28 RS/6000 SP: SP Switch2 Service Guide