CEBT PERFORM commands CEBT PERFORM SHUTDOWN
CEBT PERFORM commands
The CEBT PERFORM commands allow you to:
Shut down the alternate CICS system (CEBT PERFORM
SHUTDOWN)
Request a dump of the alternate CICS and continue
processing (CEBT PERFORM SNAP)
Cause the alternate CICS to take over from the active
CICS (CEBT PERFORM TAKEOVER).
Descriptions follow of the CEBT PERFORM commands in
alphabetic order.
CEBT PERFORM SHUTDOWN
Function: Shut down the alternate CICS system in an
XRF complex.
Description: If you enter CEBT PERFORM SHUTDOWN,
all active system tasks are allowed to finish, and the
alternate CICS system signs off normally from the CICS
availability manager (CAVM) data set.
55─ ──CEBT Perform SHutdown ──Dump ──Immediate ─5%

Options

Dump
causes a dynamic storage dump to be produced when
the shutdown is complete.
Immediate
causes the alternate CICS system to be shut down
immediately, terminating all active tasks. The alternate
CICS signs off abnormally from the CAVM data set. This
can cause the primary (active) CICS system to abend if
tasks are still running.
Chapter 7. Master terminal (alternate CICS) CEBT 25