GEM0650/0956/1256A/W | For the Installer | |||||
Final Check List: |
| |||||
|
|
|
| _______1. | Is the ice machine installed indoors in a location where the air and water temperatures are | |
|
| |||||
|
|
|
| |||
|
|
|
|
| controlled and where they do not exceed the design limitations? |
|
|
|
| _____2. | Is there an electrical service disconnect within sight of the installed machine? | ||
|
| |||||
|
|
| _____3. | Has the voltage been checked and compared to the nameplate requirements? | ||
|
| |||||
|
|
| _____4. | Have all the plumbing connections been made and checked for leaks? |
| |
|
| |||||
|
|
|
|
| ||
|
|
| _____5. | Is the ice machine and storage bin level? |
| |
|
|
| ||||
|
|
| _____6. | Is there a minimum of 6 inches of clearance at the back of the machine for proper service | ||
| ||||||
|
|
|
|
| access and air circulation? |
|
|
|
| _____7. | Is the water pressure a minimum of 20 psig? |
| |
|
| |||||
|
|
|
|
| ||
|
|
| _____8. | Has the ice machine been secured to the bin? |
| |
|
|
| ||||
|
|
| _____9. | Is there clearance over the top of the ice machine for service access? |
| |
|
|
| ||||
|
|
| ____10. | Is there a water shut off valve installed near the ice machine? |
| |
|
|
| ||||
|
|
| ____11. | Have all the shipping blocks been removed from the ice machine? |
| |
|
|
| ||||
Insure the machine is level
Note: Fasten the ice machine to the bin with the hardware supplied with the ice machine
Page 9
