Icom IC-40S Specifications, DGeneral DTransmitter, DReceiver, Current drain approx

9
	SPECIFICATIONS

DGeneral			DTransmitter
• Frequency coverage	: 450.000–480.000 MHz
	(Incl. all 40 UHF C.R.S. ch.)		• Output power	: Max. 5 W (at 9.6 V DC)
• Mode	: FM (16K0F3E)		• Modulation	: Variable reactance frequency
• Tuning step increment	: 25 kHz			modulation
• Acceptable power supply	: 9.6 V DC nominal		• Max. frequency deviation	: ±5 kHz
(negative ground)	(authorized battery packs)		• Spurious emissions	: 70 dB typical
• Usable temp. range	: –10˚C to +60˚C		• Adjacent channel power	: 70 dB typical
• Frequency stability	: ±5 ppm		• External mic. connector	: 3-conductor 2.5 (d) mm/2 kΩ
• Current drain (approx.)	:		DReceiver
Tx	at 5 W	1.6 A
	at 1 W	0.7 A	• Receive system	: Double conversion
Rx	standby	60 mA		superheterodyne
	max. audio	250 mA	• Intermediate frequencies	: 1st	46.35 MHz
	power saved	13 mA		2nd	450 kHz
• Antenna impedance	: 50 Ω (nominal)		• Sensitivity	: 0.25 µV at 12 dB SINAD
• Dimensions	: 57(W) ✕140(H) ✕37(D) mm		• Squelch sensitivity	: 0.25 µV typical (at threshold)
(projections not incl.)			• Adjacent ch. selectivity	: 70 dB typical
• Weight (with BP-195)	: 370 g		• Spurious response	: 70 dB typical
			• Intermodulation rejection	: 65 dB typical
			• Audio output power	: 500 mW typical at 10%
			(at 9.6 V DC)	distortion with an 8 Ω load
			• External SP connector	: 2-conductor 3.5 (d) mm/8 Ω

All stated specifications are subject to change without notice or obligation.

18