■Group and priority scans
Group and priority scans repeatedly watch a priority channel while scanning only specified channels. This is useful when waiting for calls on the priority channel or several specified channels.
Group and priority scans behave differently when transmit- ting. During group scan, transmission is possible on a busy channel only. During priority scan, transmission is possible on a priority channel (or start channel) only.
SCAN OPERATION 4
■Setting scan tag
Scan tag must be set before starting scan. Tag channels are independently set for open, group and priority scan.
qSelect the desired channel.
wPush [O/G] to select the desired scan type.
ePush [SCN] for 2 sec. to set the channel as a tag channel.
- “X” appears for tag channels.
rRepeat step e to cancel the tag channel setting.
qPush [O/G] to select open scan.
-“GS” or “PS” appears when the group or priority scan is se- lected, respectively.
wSelect the priority channel if desired.
-Push [Y] or [Z] key to select a channel.
-Push [O/G] for 2 sec. to set the channel to the priority channel.
Start channel
MR
Priority indication
Scanning channel
Appears for channels to be scanned.
MR | SCN |
for 2 sec.
For open scan, cancel the tag channel setting to skip un- desired channels such as usually busy channels. This speeds up the scan interval. All memory channels may be set as tag channels by default.
ePush [SCN] to start group or priority scan.
- Cancelling tag channels speeds up the scan interval.
rWhen receiving a signal, scan pauses and resumes ac- cording to the selected scan resume condition. (p. 10)
tPush [SCN] to stop the scan.
For group scan, set only
9
