3 BASIC OPERATION

■Call channel programming

Call channel is used to select Channel 9 (default), however, you can program the call channel with your most often-used channels in each channel group for quick recall.

q Push both [Y] and [Z] on the transceiver one or more times to select the desired channel group (U.S.A., International or Canada) to be programmed.

w Push [16•9] for 1 sec. to select the call channel of the selected channel group.

• “CALL” and call channel number appear.

e Push [16•9] again for 3 sec. (until a long beep changes to 2 short beeps) to enter the call channel programming condition.

•Channel number starts blink- ing.

rPush [Y] or [Z] to select the desired channel.

tPush [16•9] to program the displayed channel as the call channel.

•Push [CH/WX•DUAL] to can- cel.

•The channel number stops blinking.

8