6 DSC OPERATION
DTransmitting a Group call
The Group call function allows you to transmit a DSC signal to a specific group only.
qPush [DSC•POS] to enter the DSC menu.
wPush [Y] or [Z] to select “ 
,” push [DSC•POS].
ePush [Y] or [Z] to select the desired
• The ID code must be set in advance. (p. 13)
rPush [Y] or [Z] to select the desired intership channel, and push [DSC•POS].
•Intership channels are already preset into the transceiver in pre- ferred order.
•After pushing [DSC•POS], Channel 70 is selected and “ 
” appears at the channel comment indicator.
Push
tPush [DSC•POS] to transmit the Group call.
•If Channel 70 is busy, the transceiver stands by until the channel becomes clear.
•Routine category only is available.
Transmitting
yAfter the Group call has been transmitted, the specified channel (in step r) is selected automatically.
Scrolls
uPush and hold [PTT] to communicate your message to the responding ship.
20