12 COMMANDMIC II™
■Intercom operation
qPush [LO/DX• IC SCR] for 1 sec.
to activate the Intercom function.
wPush and hold [PTT] to talk.
• “ 
” appears at the channel comment indicator.
eRelease [PTT] to listen.
•“ 
” appears at the channel comment indicator when the trans- ceiver is in talking mode.
r Push [LO/DX• IC SCR] to cancel the Intercom function.
•Pushing [16•9] also cancels the Intercom function.
For your reference:
In case the Intercom mode is selected with the transceiver while the microphone power is OFF, the microphone power is automatically turned ON and the Intercom mode is selected.
DIntercom beep function
➥ Push and hold [LO/DX• IC SCR] for more than 1 sec.
•Emits the Intercom beep while holding.
qWhile pushing [H/L], push
[VOL• DIM PA/RX 
] to enter the Public Address mode.
w Push and hold [PTT] to talk.
•“ 
” appears at the channel comment indicator.
eRelease [PTT] to listen.
•“ 
” appears at the channel
comment indicator when the transceiver is in talking mode.
•To adjust the audio output level, push [Y] or [Z].
rTo cancel the Public Address mode, repeat step q.
• Pushing [16•9] also cancels the Intercom function.
While in the Public Address mode, the transceiver functions (transmit and receive) are interrupted. If the transceiver is in transmit condition, the Public Address function is not available.
■RX Speaker function
qPush [VOL• DIM PA/RX 
] for 1 sec. to enter the RX Speaker mode.
•“ 
” scrolls at the channel comment indicator.
•To adjust the audio output level, push [Y] or [Z] while pushing [VOL• DIM PA/RX 
].
wTo cancel the RX Speaker mode, repeat step q.
• “ 
” scrolls at the channel comment indicator.
50