16
3BASIC OPERATION
■Receiving
Make sure the hardware installation is finished. (p. 1)
DUsing the multi-function receiver screen
qClick [POWER] to turn power ON.
wClick the [VOLUME] control with the sub mouse button to
increase the audio level; click the [VOLUME] control with
the main mouse button to decrease the audio level.
•When clicking and holding the control, the audio level scrolls up
or down.
•Pushing the PC’s [c] or [d] key also sets the audio level.
eSet an operating frequency and mode. (pgs. 17, 18)
rClick the [SQUELCH] control with the sub mouse b utton to
increase the squelch level (tight squelch); click the
[SQUELCH] control with the main mouse button to de-
crease the squelch level (loose squelch).
•When clicking and holding the control, the squelch level scrolls
up or down.
tWhen a signal is received:
➥Squelch opens and audio is emitted from the speaker.
➥The S-meter shows the relative signal strength.
DUsing the simple function receiver screen
qClick [PWR] to turn power ON.
wClick [MENU] and select the ‘Function Controller’when it
is not displayed.
eClick [VOLJ] or [VOLK] to set the desired audio level.
•When clicking and holding either button, the volume level scrolls
up or down.
•Pushing the PC’s [c] or [d] key also sets the audio level.
rSet an operating frequency and mode. (pgs. 17, 18)
tClick [SQLJ] or [SQLK] to set the desired squelch level.
•When clicking and holding either button, the squelch level scrolls
up or down.
yWhen a signal is received:
➥Squelch opens and audio is emitted from the speaker.
➥The S-meter shows the relative signal strength.
q Power switch e Select mode
w Set volume e Set frequency
r Set the squelch level