Icom IC PCR100 Automatic mode selection

BASIC OPERATION

■Automatic mode selection

An automatic mode function is available to automatically set

the receive mode, IF filter passband width and tuning step

after inputting a frequency.

Each click of the [AUT-M] button toggles the automatic mode

function on and off.

•For the simple function receiver screen, the [AUT-M] b utton is on the

function controller screen.

The default setting for the automatic mode function can be

added to, changed or deleted. Up to 20 ranges can be mem-

orized into the automatic mode function settings.

qFor the multi-function receiver screen, click the [SET] but-

ton to call up the setting screen.

For the simple function receiver screen, click the [MENU]

button and select the ‘Function Setting (SET)’to call up the

setting screen.

wClick the [Auto Mode] tab to display the automatic mode

list.

eClick a cell in the [Freq Low] column and the desired line.

rInput the lower frequency of the frequency range from the

keyboard, then push [Enter].

•When nothing is input into the [Freq Low] or [Freq High] column,

settings for other columns cannot be made.

•When inputting a new frequency, other data automatically ap-

pears in the other column.

•To delete a frequency range setting, enter [0] or [Space] into the

[Freq Low] column from the keyboard.

tInput the higher frequency of the frequency range into the

[Freq High] column, push the [Enter] key.

ySet other data such as mode, tuning step, etc., if desired.

•Double-clic k the desired cell, select the desired item and double-

click the selection.

uClick the close (["]) button to close the setting screen.

Click to bring up the

setting screen.