30
5SCAN OPERATION
■Memory scan
This function searches all memory channels in a selected
memory bank.
DUsing the multi-function receiver screen
qMake sure the squelch is set to the threshold point. (closed
condition)
wClick the [BANK∧] or [BANK∨] button to select the de-
sired memory bank.
•When using the memory list screen, click [BANK#]/[BANK$]
or select a bank name with [$] to select a memory bank.
eClick the [SET] button to call up the setting screen if it is
not displayed.
rClick the [Memory SCAN] tab.
tMake sure the chec k box es are not chec k ed (%) then clic k
the close (["]) button.
yClick the [MEMO] button to start memory scan.
•“MEMO”flashes while scanning.
uTo cancel the scan, click [STOP] or [MEMO].
DUsing the multi-function receiver screen
qMake sure the squelch is set to the threshold point. (closed
condition)
wClick the [BANK] button and select the desired memory
bank.
•When using the memory list screen, click [BANK#]/[BANK$]
or select a bank name with [$] to select a memory bank.
eCall up the setting screen if it is not displayed.
•Click the [MENU] button and select the ‘Function Setting (SET).’
•When the scan controller screen is in use, click the [SET] button
on the screen.
rClick the [Memory SCAN] tab.
tMake sure the chec k box es are not chec k ed (%) then click
the close (["]) button.
yClick the [MEMO] button in the scan controller screen to
start memory scan.
•“Memory SCAN”flashes while scanning.
uTo cancel the scan, click [STOP] or [MEMO].
Not checked for the memory scan