Icom VHF MARINE TRANSCEIVER, IC-M502 Set mode programming, SET Mode Construction, Push 16

8 SET MODE

■Set mode programming

Set mode is used to change the conditions of the trans- ceiver’s functions: scan mode (normal or priority), scan re- sume timer, weather alert, dualwatch/tri-watch selection, DSC watch, transceiver’s beep tone, internal speaker (transceiver or HM-127), LCD contrast (transceiver or HM-127), RF atten- uation level, scrambler code and scrambler type.

•Available functions may differ depending on dealer set-

ting.

•The optional HM-127 has it’s own settings for the beep tone and LCD contrast.

qTurn power OFF.

wWhile pushing [16•9], turn power ON to enter set mode. e After the display appears, release [16•9].

r Push [16•9] to select the desired item, if necessary.

t Rotate the channel selector to select the desired condition of the item. Use [Y]/[Z] when using an optional HM-127.

y Turn power OFF, then ON again to exit set mode.

• SET MODE CONSTRUCTION

Scan mode	Scan resume timer	Weather alert	Dual/tri watch	DSC watch
Scan mode	Scan timer	WX alert	DUAL/TRI	DSCÊwatch
		Push 16 9		Beep tone
				Beep
Scrambler type	Scrambler code	Attenuation level	LCD contrast	Internal speaker
Scrambler	Scrambler	Attenuation	LCD	Internal
type	code	level	contrast	speaker

30