Icom VHF MARINE TRANSCEIVER, IC-M502 Setting tag channels, Dualwatch/Tri- watch operation

13 HM-127 REMOTE-CONTROL MICROPHONE

■Starting a scan

qPush [CH/WX•U/I/C] several times while pushing [H/L] to select the channel group (USA, INT, CAN), if desired.

•When the weather alert function is in use, select the desired weather channel with [CH/WX] and [Y]/[Z].

wPush [SCN] to start priority or normal scan.

•“SCAN” appears during normal scan.

•The priority channel readout indicates “16”, and “P” and “SCAN” indicators ap- pear during priority scan.

•When a signal is received, scan pauses until the signal disappears or resumes after pausing 5 sec. according to set mode setting (Channel 16 is still moni- tored during priority scan).

•Push [Y]/[Z] to check the scanning tag channels, to change the scanning direc- tion or resume the scan manually.

eTo stop the scan, push [SCN].

•“SCAN” disappears.

•Pushing [PTT], [16•9] or [CH/WX] also stops the scan.

■Setting tag channels

qPush [CH/WX•U/I/C] several times

while pushing [H/L] to select the channel group (USA, INT, CAN), if desired.

wPush [Y]/[Z] to select the desired

channel to set as a tag channel.

ePush [SCN•TAG] for 1 sec. to set the displayed channel as a tag channel.

• “ ” appears.

rTo cancel the tag channel setting, push [SCN•TAG] for 1 sec.

• “ ” disappears.

•Clearing all tag channels in the selected channel group

➥Push [SCN•TAG] while pushing [H/L] for 3 sec. (until long beep changes to 2 short beeps).

■Dualwatch/Tri- watch operation

qPush [Y]/[Z] to select the desired channel.

•Push [CH/WX•U/I/C] several times while pushing [H/L] to select the channel group (USA, INT, CAN), if desired.

wPush [CH/WX•DW] for 1 sec. to start dualwatch or tri-watch.

•“DUAL” appears during dualwatch; “TRI” appears during tri-watch.

•Beep tone sounds when a signal is re- ceived on channel 16.

•Tri-watch becomes dualwatch when re- ceiving a signal on the call channel.

eTo cancel dualwatch/tri-watch, push [CH/WX•DW] again.

54