ENGLISH
CONNECTING YOUR MONITOR
AEnsure that both the computer and the monitor are switched off.
BConnect the computer to the monitor with the signal cable. (See page 20 for CONNECTOR PIN ASSIGNMENT.)
CConnect the monitor to the USB compliant computer with the USB Cable when using the USB hub features.
DConnect the Power Cable to the monitor first and then to the power supply.
NOTE n The signal cables used for connecting the computer and monitor vary by the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard 15 pin
n For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama office for a suitable adaptor.
n Make sure you tighten the finger screws at each end of the signal cable.
n Cables are connected easily by rotating the panel 90 degrees. (See page 8 for PANEL ROTATION.)
n Cables can be bundled together inside the cover at the back of the stand. See next page for cable wiring.
[Example of Connection]
< Back >
Power Cable (Accessory)
(Accessory) 
to DVI connector 
of computer
(Accessory) 
to 
of computer
USB Cable (Accessory)
Keyboard
Mouse
Printer
Computer
6BEFORE YOU OPERATE THE MONITOR
