[Cable Wiring]
ARemove the cover at the back of the stand by sliding it upward.
BCollect cables at the back of the stand.
C Replace the cover by inserting the tabs into guide holes and then sliding the cover downward.
ENGLISH
COMPUTER SETTING
nSignal Timing
When you connect the monitor to the computer for the first time, set the signal timing of the computer to VGA before connection. Change to the desired signal timings listed on page 19 in COMPLIANT TIMING, after you confirm that the picture appears normally at VGA.
nWindows 95/98/2000/Me/XP Plug & Play
The iiyama LCD monitor complies with DDC1/2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP by connecting the monitor to DDC1/2B compliant computer with the Signal Cable supplied. Windows 95/98/2000/Me/XP Monitor Information File for iiyama monitors may be necessary for your computer and obtained via the Internet, using the address:
NOTE
http://www.iiyama.com (U.S.A.)
http://www.iiyama.co.uk (U.K.)
n For additional information on how to download the driver for your monitor, please access one of the internet sites noted above.
nMonitor Drivers are not required in most cases for Macintosh or Unix operating systems. For further information, please contact your computer dealer first for advice.
BEFORE YOU OPERATE THE MONITOR 7
