Basic Setup Menu Example

The procedure below shows how to configure the following three settings:

Image Adjustment J Contrast

Image Adjustment J Color Mode

Option Settings 1 J Eco Mode

Note

zCertain settings on the setup menu cannot be changed while there is no input signal to the projector. Because of this, you should configure setup menu settings after selecting an input source and starting projection.

zThis example covers basic steps only. For more detailed information, see “Setup Menu Contents” on page 13.

To configure the “Image Adjustment J Contrast” setting

1 Press the [MENU] key to display the setup menu.

2 “Image Adjustment” is initially selected on the main menu, so simply press the [ENTER] key.

3 Press the [T] key once to select “Contrast”.

4 Use the [W] (lighter) and [X] (darker) keys to adjust contrast.

To configure the “Image Adjustment J Color Mode” setting

1 Press the [T] key once to select “Color Mode”. 2 Press the [ENTER] key.

zThis displays the color mode menu.

3 Use the [T] and [S] keys to select the color mode you want. 4 After selecting the color mode you want, press the [ESC] key.

10

Page 11
Image 11
InFocus IN12 manual Basic Setup Menu Example, To configure the Image Adjustment J Contrast setting