InFocus IN12 manual To replace the lamp, Loosen the three screws indicated by an S mark

To replace the lamp

Important!

When replacing the lamp, use the special screwdriver that comes with the SP-LAMP-029 replacement lamp. The projector does not come with a screwdriver.

1 Turn off the projector and unplug its AC power cord.

2 Wait for about 60 minutes to allow the projector’s current lamp to cool down completely.

3 Turn over the projector and place it on top of a desk or on some other stable surface.

4 Loosen the lamp cover screw, and then remove the lamp cover.

Lamp cover

5 Loosen the three screws indicated by an S mark.

Lamp cartridge

28