Manuals / InFocus / Computer Equipment / Projector

InFocus IN12 manual Connecting to a Component Video Output Device

Models: IN12

1 35

Page 33

Connecting to a Component Video Output Device

Some video devices are equipped with a component video output terminal. You can use an optionally available VESA to component video adapter (SP-VESA-ADPT-R)and a component video cable to connect the RGB input terminal of the projector to the component video output terminal of a video device.

Important!

Always turn off the projector and the video device before connecting them.

zComponent video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to match the colors of the plugs on the optional adapter with the colors of the terminals (Green: Y; Blue: Cb/Pb; Red: Cr/Pr).

zNote that connection only to an analog component video output terminal is supported. Connection to a digital output terminal is not supported.

Page 33

Image 33

InFocus IN12 manual Connecting to a Component Video Output Device

Contents

Page Contents ContentsUser Maintenance Configuring Advanced Projector SettingsAbout this manual AppendixTo adjust image brightness Adjusting Image BrightnessOperation During Projection Image Operations During ProjectionZooming an Image Selecting the Color ModeTo change the color mode z This will causeMomentarily Cutting Off the Input Source Image Freezing an ImageTo freeze the projected image To display a pointer in the image Displaying a Pointer in the Projected ImageTo select the pointer type To clear the pointer from the imageChanging the aspect ratio of the projected image Eco ModeTo turn the Eco Mode on or off Using the FUNC Key z Adjust image brightnessz Turn the Eco Mode on or off Basic Setup Menu Operations Configuring Advanced Projector SettingsDisplaying the Setup Menu Configuring Setup Menu SettingsBasic Setup Menu Example To configure the “Image Adjustment J Contrast” settingTo configure the “Image Adjustment J Color Mode” setting After you are finished, press the MENU key to exit the setup menu To configure the “Option Settings 1 J Eco Mode” settingPress the ESC key Press the T key three times to select “Eco Mode”Page Setup Menu Contents Image Adjustment Main Menu Setting Setting NameInput DescriptionAbout the “Signal Specific” Setting Unit Screen Settings Main MenuSetting Setting NameInput DescriptionSetting Setting NameInput DescriptionInput Settings Main Menu Option Settings 1 Main Menu Setting Setting NameDescription InputSetting Name Option Settings 2 Main MenuSetting InputSetting Name Operational Info Main MenuSetting InputSetting Name Restore All Defaults Main MenuSetting InputCleaning the Projector User MaintenanceCleaning the Projector Exterior Cleaning the LensTo check the current lamp use time Replacing the LampReplacing the Lamp When to replace the lampTo replace the lamp Resetting the Lamp Time To reset the lamp time after exceeding the lamp life To reset the lamp timeRemote Controller Signal Range AppendixRemote Controller Range Connecting to a Component Video Output Device 800 ⋅ 1024 ⋅ 1280 ⋅ Full-screen Display of an RGB ImageReattaching the Lens Cover