Note
z The language setting and the password are not returned to their initial factory defaults if you select Option Settings 1 in step 3.
z For details about how the above procedure initializes settings, see the explanations of the settings under “Setup Menu Contents” on page 13.
12
After you are finished, press the [MENU] key to exit the setup menu.
8
6 Use the [S] key to select “Yes”.
7 To restore the settings of the main menu to their initial defaults, press the [ENTER] key.
z To exit the operation without doing anything, press [ESC] instead of [ENTER].
z This will display a confirmation screen like the screen shown below.
Press the [ENTER] key.
3
4 Use the [T] key to select “Restore Menu Defaults”. 5 Press the [ENTER] key.
Restoring Projector Settings to Their Initial Factory Defaults
You can use the procedures in this section to restore all of the settings on a particular main menu or all of the settings on the setup menu to their initial factory defaults.
To restore all settings on a particular main menu to their initial factory defaults
1 Press the [MENU] key to display the setup menu.
2 Use the [T] and [S] keys to select the main menu whose settings you want to restore to their initial factory defaults.
z You can select Image Adjustment, Screen Settings, Input Settings, Option Settings 1, or Option Settings 2.
