
S e t t i n g | u p | t h e | P r o j e c t o r |
|
|
|
|
CAUTION: Turn off the computer, monitor and projector whenever you connect or disconnect cables.
NOTE: The projectors are optimized for use with CableWizard II. If you have CableWizards from other models of In Focus projectors, we do not recommend using them. Image quality is reduced by using a CableWizard other than CableWizard II. The label on the bottom reads CableWizard or CableWizard II.
NOTE: You must disconnect all cables before turning the selector on the CableWizard.
Connecting the CableWizard™II to the Projector
The CableWizard II (referred to as “CableWizard” in this manual for brevity) simplifies the connection process by providing a cen- tral hub for all the connections between the projector and your computer. The connectors on the CableWizard are labeled with icons.
Connect the end of the CableWizard cable to the
connector on the projector’s connector panel (Figure 5).
FIGURE 5
Connecting the CableWizard to the projector
Selecting Connectors on the CableWizard
Turn the selector on the top of the CableWizard to reveal the correct connectors for your computer.
FIGURE 6
Selecting connectors on the CableWizard
8