InFocus LP 725, LP 735 warranty Using the On-Screen Menus

Standby

When you press standby, the display and audio turn off and a blank screen is displayed for 15 minutes. After 15 minutes, the lamp goes out if you haven’t pressed standby again. You can change the amount of time the projector stays in standby mode; see “Standby TIme” on page 37 for details.

•If you press standby again within 15 minutes, the projector returns to normal operations immediately.

•If you press standby again after 15 minutes, there is about a 30 second delay before the lamp turns back on.

Video

When you have more than one source (computer or LiteShow Pro and video) connected to the projector, select between them by pressing the button for the source you want.

Press video to display the image from your video player.

Volume

•To increase the volume, press

•To decrease the volume, press

Volume adjustments are saved for each source you have con- nected.

Using the On-Screen Menus

The projector has four on-screen menus that allow you to make image adjustments and change a variety of settings. Most of these adjustments aren’t available directly from the keypad.

To open the on-screen menus, press the menu button on the key- pad. Press menu again when you want to close the menus and save any changes.

To select a menu, use the disk mouse on the keypad or remote to move the cursor to the tab for the menu you want, then click either mouse button.

29