InFocus LS700 warranty Attach external speakers see the following page

S e t t i n g u p t h e P r o j e c t o r

NOTE: The projector does not have internal speakers, so you must attach external speakers for audio.

NOTE: You can connect 2 separate video sources (S-video and composite) and toggle between them.

CAUTION: Your video player may also have a “Video Out” port for a coaxial cable connection. DO NOT use this to connect to the projector.

S-video cable

A/V cable

FIGURE 7

Connecting the projector to a video player using an S-video cable and the audio con- nectors on the standard A/V cable

4Plug the A/V cable’s white connector into the left “audio out” port on your video player. Plug the cable’s red connector into the right “audio out” port on the video player (Figure 6 and Figure 7).

•If you’re using an S-video cable, the yellow connectors on the A/V cable remain unused (Figure 7).

5Plug the A/V cable’s other white and red connectors to the left and right “audio in” ports on the projector.

6Attach external speakers (see the following page).

The projector is compatible with these major broadcast video standards: NTSC, PAL, PAL-M, and PAL-N. It automatically adjusts to optimize its performance for the incoming video. The input signals for PAL-M and PAL-N video cannot be automati- cally detected, therefore they must be chosen manually; see “Video Standard” on page 27.

8