Manuals / InFocus / Computer Equipment / Projector

InFocus LS700 warranty Help menu

Models: LS700

1 55

Download 55 pages 20.46 Kb

Page 34

U s i n g	t h e	P r o j e c t o r

Lamp hours used

Indicates how many hours the current lamp has been in use. The counter starts at zero hours and counts each hour the lamp is in use. When the counter reaches 2000 hours, the lamp monitor light turns on. Change the lamp when the brightness is no longer acceptable. See “Replacing the Projection Lamp” on page 33 for details.

Computer resolution

Shows your computer’s resolution setting. To change this, go to your computer’s Control Panel and adjust the resolution in the Display tab. See your computer’s user’s guide for details.

Horizontal refresh rate (KHz)

The frequency that one horizontal line is displayed.

Vertical refresh rate (Hz)

The frequency that one video frame is displayed.

Mute status

Indicates if the audio is muted.

Software version

Indicates the projector’s software version. This information is useful when contacting Technical Support.

CableWizard version

Indicates the CableWizard’s software version. This information is useful when contacting Technical Support.

Source

Indicates the active source, Computer or Video.

Speakers

Indicates if external speakers are connected.

Help menu

This read-only menu displays the on-line help.

30

Image 34

InFocus LS700 warranty Help menu

Contents

Setting up the Projector TABLE OF CONTENTSSafety Instructions Using the ProjectorAppendix Maintenance & TroubleshootingIndex SAFETY INSTRUCTIONS Warning Don’t block ventilation openingsWarning Hot surface. Do not touch Compatibility Image ResolutionINTRODUCTION Unpacking the ProjectorShipping box contents NOTE The contents of your shipping box may vary dependingon the configuration you’ve ordered I n t r o d u c t i o npower connector panel elevator buttonremote control receiver connectorUsage Guidelines WarrantyIf You Need Assistance SETTING UP THE PROJECTOR accessory Preparing to Connect Your Equipment to the Projectorwired remote S e t t i n gConnecting a Video Player audio/video cable6 Attach external speakers see the following page Connecting external speakers Connecting an External SpeakerNOTE The external speakers must be amplified Connecting a Computer Powering up the Projector and Adjusting the Image Turning Off the Projector USING THE PROJECTOR Basic Image AdjustmentFocus ring, zoom ring, and elevator button Adjusting the ProjectorLeveling knob To raise the projector 1 Press and hold the elevator button Figure Using the Remote Control Using the Remote and Keypad ButtonsPress computer to display your computer image Standby VolumeVideo Scribble Remote only buttons PowerKeypad only buttons Brightness LightOn-screen menus Using the MenusDisk mouse and mouse buttons on keypad and remote Adjusting the brightness changes the intensity of the image This setting adjusts the transition between color edges Audio Menu Auto Resize-Computer Image MenuAuto Image Auto Resize-VideoNOTE The Manual Sync Manual Tracking, Horiz. Posi Follow these steps to manually adjust the horizontal position Video Standard Controls MenuDefault Source Standby TimeDisplay Messages Auto Source SelectPlug and Play Display Startup ScreenLanguage menu Language menuStatus menu Status menuHelp menu Cleaning the Lens MAINTENANCE & TROUBLESHOOTINGCleaning the Fan Intake Filter M a i n t e n a n c e 3 Clean the filter4 Replace the filter T r o u b l e s h o o t i n gReplacing the Projection Lamp 7 Align the new lamp module in the correct direction Replacing the Batteries in the Remote Control Using the Kensington LockTroubleshooting Solutions to Common Problems Change the Color Temperature. See “Color Temperature” on page Problem Image is too wide or narrow for screen Problem Computer image isn’t centered on the screenProblem Image is out of focus Problem the projector displays vertical lines, “bleeding” or spots Problem Image and menus are reversed left to rightProblem Image and menus are upside down Problem The screen resolution is not rightProblem Lamp shuts off Problem Lamp seems to be getting dimmerProblem Remote not operating correctly Dimensions APPENDIX SpecificationsTemperature WeightA p p e n d i Remote ControlInput Power Requirements Video Audio InputPower Cords one ships with projector, type depends on country AccessoriesStandard Accessories ship with the projectorOptional Accessories A p p e n d iProjected Image Size Projected image sizeImage Size A p p e n d iImage Size, Width and Height for Lens at Maximum Distance toINDEX NumericsI n d e Page I n d e