U s i n g | t h e | P r o j e c t o r |
|
|
|
Standby 
When you press standby, the display and audio turn off and a blank screen is displayed for 1 minute. After 1 minute, the lamp goes out if you haven’t pressed standby again. You can change the amount of time the projector stays in standby mode; see “Standby Time” on page 27 for details.
•If you press standby again within 1 minute, the projector returns to normal operations immediately.
•If you press standby again after 1 minute, there is about a 30 second delay before the lamp turns back on.
Video 
When you have more than one source (computer and video) con- nected to the projector, select between them by pressing the but- ton for the source you want.
Note that the keypad has one video button, the remote has a Video 1 button and a Video 2 button.
On the keypad, press video to display the image from your video player. Press it again to toggle between a composite video input and an
On the remote, press Video 1 to toggle between a composite video input and an
Volume 
•To increase the volume, press 
•To decrease the volume, press 
Volume adjustments are saved for each source.
18
