U s i n g | t h e | P r o j e c t o r |
|
|
|
Auto Source Select
This setting toggles between On and Off. When this feature is Off, the projector defaults to the source selected in Default Source. To display another source, you must manually select one by press- ing the computer or video button on the keypad or remote. When this feature is On, the projector automatically finds the active source, checking the default source first. Click either mouse but- ton to toggle between the options.
Plug and Play
This setting toggles between On and Off. When it is On, most new computers will automatically recognize the projector, then set the monitor resolution and refresh rate accordingly. You need to set the Plug and Play setting to Off for the projector to display properly on some older computers. The Plug and Play setting does not affect video images. If the projector display constantly changes between the computer image and the message, “Perfect- ing the image”, you may need to set Plug and Play to Off.
Display Messages
This setting toggles between On and Off. When this feature is On, status messages such as “No signal detected” and “Standby” appear in the
Display Startup Screen
This setting toggles between On and Off. When this feature is On, the InFocus startup screen appears when the projector starts up and remains until an active source is detected. The startup screen contains information on contacting InFocus. Click either mouse button to turn this feature off and display a plain black or blue screen instead of the startup screen.
28
