InFocus LiteShow User’s Guide

25

 

 

4Replace the LiteShow on the projector (with the card still removed from the slot). A status dialog appears and pro- vides a 30-second countdown for the reset. After several more seconds, the splash screen shows “Restored”. The Splash Screen fields are updated with the preset values. The restore operation is complete when the following mes- sage appears on the projection screen “Factory Settings Restored”. To cancel the reset, simply remove the LiteShow from the projector before the 30-second countdown expires.

5Remove the LiteShow module from the projector. Replace the card by aligning it so that the colored label faces the back of the module and carefully inserting the card into the slot and pressing it into place. Make sure the card is fully seated. Replace the cap, then replace the LiteShow on the projector.

Page 30
Image 30
InFocus network adapter manual InFocus LiteShow User’s Guide