Insignia
3While in the program edit mode, select a song or track, then press the ENTER button to place the selected song or track in memory.
4Repeat this process to store up to 30 songs or tracks in memory.
5Use the 
/ 
/ 
/ 
buttons to highlight the programmed song or track that you want to play first on your programmed playback list, then press the PLAY button or the ENTER button to begin play.
•Playback begins in the order in which you programmed the songs or tracks.
•Playback stops after all of the songs or tracks on the program list have played once.
6To resume normal playback, select any track on the list and press the PLAY button.
To repeat playback of programmed tracks:
1Press the REPEAT button to display a screen which offers three possible repeat options:
•Track - Repeats the currently playing track.
•All - Repeats all tracks on the programmed list.
•Off (No display) - Cancels the repeat play.
2Select either of the first two options to repeat programmed playback. Select the Off option to cancel all programmed playback. You also can press the SKIP button once during track playback to cancel the repeat playback.
To erase programmed tracks:
1Stop playback, then press the PROGRAM
button on the remote control. The 
icon displays on the screen.
2Use the 
/ 
/ 
/ 
buttons to highlight the programmed song or track that you want to erase from your programmed playback list, then press the CLEAR button to remove the song or track from the list.
3Repeat this process to erase additional songs or tracks from memory.
To erase the programmed playback list:
1Stop playback, then press the PROGRAM
button on the remote control. The 
icon displays on the screen.
2Use the 
/ 
/ 
/ 
buttons to select the CLEAR ALL option, then press the ENTER button. The entire programmed playback list is erased.
3Turning off the DVD player or removing the disc from the tray also will erase the programmed playback list.
Viewing pictures
This DVD player also has the capability to display pictures that have been recorded in a JPEG format.
If you are using a disc that also contains audio files, you can also listen to music files while viewing pictures from the disc. Program the music to play using the instructions in the “Playing audio, MP3, or WMA discs” section, then use the following procedure to view the images.
Because this DVD player supports VR formatting, you can create your own picture CDs and play them on this player. However, when creating discs, use the following guidelines:
•If you record images using software that cannot create a file system (such as
•File names should have a maximum of 8 letters and must incorporate a “.jpg” extension. This player cannot read an file that has a file extension other than “.jpg” so JPEG files with other extensions must be renamed before burning them to a disc.
•File names should not contain special letters such as / ? * : “ < > l etc.
•The total number of files in a folder should be less than 1012 files.
When a disc is inserted into the player, the menu screen appears. You can use the menu screen to select folders and images. Depending on the size and number of JPEG files, the player may be very slow in displaying folder contents. If folder contents do not appear after several minutes, some of the files may be too large. Reduce the resolution of the JPEG files to less than five million pixels and burn another disc.
To select folders and images:
1Press the 
or 
button to choose a folder from the folder list on the left side of the screen. Press the DVD MENU button to move to the next page.
2Press the ENTER button to select the highlighted folder. The images available in that folder are listed.
To return to the previously viewed Folder list while viewing a file list, use the 
or 
button to highlight the 
button and press
ENTER.
15 |