Insignia NS-1UCDVD 7

Insignia NS-1UCDVD DVD Player

2Plug the audio/video cables from the DVD player’s jacks to the TV as follows:

The arrow on the cable connector body should face up for correct alignment with the connector on the player.

Cable	Connect on player	Connect on tv to:
Cable	to:	Connect on tv to:
	to:

S-video	S-VIDEO OUT	S-VIDEO IN
cable (S)

Video	VIDEO OUT	VIDEO IN
Cable (V)

Audio	AUDIO OUT	AUDIO IN (left and
Cable (A)		right)

Y PB PR	COMPONENT/PROGRE	Corresponding TV jacks
Cable (C)	SSIVE SCAN

Note

Connecting both the S-video and component cables may cause the TV display to be unstable. To resolve the problem, disconnect one of the problems.

Connecting your player to an HDMI TV

High Definition Multimedia Interface (HDMI) supports both video and audio on a single digital connection for use with DVD players, set-top boxes, and other AV devices.

HDMI was developed to provide the technologies of High-bandwidth Digital Content Protection (HDCP). HDCP is used to protect both transmitted and received digital content.

HDMI has the capability to support standard, enhanced or high-definition video plus standard to multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

Note

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

To connect your player to an HDMI device:

1Set the source on your HDMI TV or monitor to HDMI as instructed in the owner’s manual.

2Connect the HDMI OUT jack on the DVD player to the HDMI jack on your HDMI TV or monitor using an HDMI cable (H).

3Press RESOLUTION repeatedly to select the desired resolution. When you use an HDMI connection, you can change the resolution (480i, 480p, 720p, 1080i) for the HDMI output.

The HDMI output will have a resolution of 480p, even if you set the resolution to 480i on the HDMI connection.

When no sound or noisy sound result from the HDMI connection, set the Audio option [Dolby Digital, DTS or MPEG] on SETUP menu to PCM or Off.

Notes

If there is noise or lines on the screen, check the HDMI cable.

Not all HDCP-compatible DVI devices will work with this player.

If your HDMI TV does not support HDCP, the screen is blue in color.

If the TV picture is abnormal, turn off the unit and then turn the unit on again.

Both PCM and Bitstream Audio out is available

when the sample frequency is set to 48kHz in HDMI connection.

If Audio setup is set to bitstream and your TV does not support Bitstream Audio out when using an HDMI connection, there may be no audio sound or sound may not be distorted.

Setting the resolution

If your TV does not accept your resolution setting, the tv picture displays abnormally. Refer to the owner’s manual for your TV to set the correct resolution.

To set the resolution:

1Press the STOP button to stop playback and put the player in stop mode.

2Press the RESOLUTION button once. The current resolution displays in the window.

3Press the RESOLUTION button repeatedly to change to the desired resolution. Available resolutions according to the connections include:

Output connection	Available resolution

HDMI VIDEO OUT	1920 x 1080i
	1280 x 720p
	720 x 480p
	720 x 480i

COMPONENT VIDEO	1920 x 1080i
OUT	1280 x 720p
	720 x 480p
	720 x 480i

VIDEO OUT	720 x 480i
	720 x 480p

S-VIDEO	720 x 480i