Insignia
TroubleshootingSpecifications
Problem | Solution |
|
|
No power. | Make sure that the power cord is |
| plugged securely into the wall |
| outlet. |
|
|
Power is on, but DVD player | • Insert a disc with the label |
does not work. | side facing up. |
| • Check the type of disc you |
| put into disc tray. This |
| player only plays DVDs, |
| audio CDs, MP3s, and |
| WMAs. |
|
|
No picture. | • Make sure that all |
| equipment is turned on. |
| • Make sure the correct |
| video input mode is |
| selected on the TV. |
| • Make sure all cables are |
| securely inserted into the |
| appropriate jacks. |
|
|
No sound or distorted sound. | • Make sure the correct |
| input mode of the audio |
| receiver is selected. |
| • Make sure all cables are |
| securely inserted into the |
| appropriate jacks. |
| • Make sure that all |
| equipment is turned on. |
| • Make sure that the AUDIO |
| option is set to the correct |
| position, then press |
| POWER again to turn on |
| the DVD player. |
|
|
Can’t advance through a movie. | You can’t advance through the |
| opening credits and warning |
| information that appears at the |
| beginning of movies because the |
| disc is programmed to prohibit |
| that action. |
|
|
Picture is distorted. | • The disc might be |
| damaged. Try another |
| disc. |
| • It is normal for some |
| distortion to appear |
| during forward or reverse |
| scan. |
|
|
Remote control does not work | • Verify that the batteries in |
properly or IR sensor is | the remote are fresh. |
inoperative. | • Verify that the remote |
| sensor eye is not |
| obstructed. |
| • Verify that the infrared |
| transmitter is pointed |
| directly at the IR sensor, |
| and is within 10 feet of the |
| sensor. |
|
|
Play starts, but then stops | • Both the player and the |
immediately. | disc are coded by region. |
| If the regional codes don’t |
| match, the disc can’t be |
| played. |
| • There is a parental lock on |
| the DVD player which |
| prevents DVDs with an |
| unacceptable rating to |
| play. |
| • The disc is dirty. Clean it. |
| • Condensation has formed. |
| Allow player to dry out. |
Note
Specifications are subject to change without notice or obligation.
General:
Power requirements: . . . . . . . . . . 120 V AC, 60 Hz
Power consumption:. . . . . . . . . . . . . . . . . . . . . 8 W
Dimensions (W x D x H): . . . . 17 x 1.4 x 7.9 inches
. . . . . . . . . . . . . . . . . . . . . . . . (430 x 35 x 202 mm) Weight: . . . . . . . . . . . . . . . . . . . . . . .3.5 lbs (1.6 kg) Operating temperature: . . . . . . . 41~95°F (5~35°C) Operating humidity: . . . . . . . . . . . . . . . . . . . 5~90% Compatible discs:. . . . . . . . . . . DVD/CD/MP3/WMA Battery Type: . . . . . . . . . . . . . . . . . . . . . . . . . . AAA Outputs:
VIDEO OUT: . . . . . . . . . . . . . 1.0 V
COMPONENT VIDEO OUT: . . . . . . . . . . . . . . . . . .
(Y): 1.0 V
(Pb and Pr): 0.7 V
AUDIO OUT: . . . .2.0 Vms (1kHz, 0 dB), 600 ohms (RCA jack (L,R) x 1)
DIGITAL OUT (COAXIAL): . . 0.5 V
DIGITAL OUT (OPTICAL): . . . 3.0 V
System:
Signal system: . . . . . . . . . . . . . . . . . . . . . . . .NTSC
Laser: . . . . . . . . . . . . . . . . . . .Semiconductor Laser
Frequency response: . . . . . . . . . . . . . . . . . . . . . . . .
(PCM 96 kHz):. . . . . . . . . . . . . . . . 8 Hz to 44 kHz
(PCM 48 kHz):. . . . . . . . . . . . . . . . 8 Hz to 22 kHz
(CD): . . . . . . . . . . . . . . . . . . . . . . . 8 Hz to 20 kHz Harmonic distortion:. . . . . . . . . . . Less than 0.02% Dynamic range: . . . . . . . . . . . . . .Better than 95 dB
17 |