Insignia NS-1UCDVD DVD Player

 

 

• For Video and S-VIDEO connections,

A digital multi-channel connection using a

 

 

 

resolution must be set to 480i or 480p;

multi-channel audio/video receiver that

 

 

 

however, VIDEO OUT is always at 480i

supports one or more of the audio formats

 

 

 

standard resolution.

supported by your DVD player such as

 

 

• For 720p and 1080i resolution on the

MPEG 2, Dolby Digital and DTS, provides the

 

 

 

component video out, only non-copy

best sound quality. Check the owner’s

 

 

 

protected discs can be played back.If the

manual for your receiver and the logos on the

 

 

 

disc is copy protected, it will be displayed

front of the receiver to verify the type of

 

 

 

at the 480p resolution without HDMI cable

system you are using.

 

 

 

connection. With HDMI cable connection,

 

 

 

 

the picture may not be display properly.

Note

Connecting your player to optional audio

If the audio format of the digital output does not

match the capabilities of your receiver, the

equipment

receiver produces a strong, distorted sound or no

sound at all.

 

You can connect your player to an external

Six Channel Digital Surround Sound via a digital

 

source to enjoy high quality stereo sound from

connection can only be obtained if your receiver is

 

equipped with a digital multi-channel decoder.

 

your DVD player.

 

 

 

Note

This DVD player has been manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.

Rear of DVD player

Amplifier (Receiver)

To connect your player to optional audio equipment:

1Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic ll / Pro Logic:

Use audio cables (A) to connect the left and right AUDIO OUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system.

2Amplifier equipped with 2-channel digital stereo (PCM) or audio/video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS):

Use an optional OPTICAL O or COAXIAL X (A) digital audio cable to connect one of the DVD player’s OPTICAL O or COAXIAL X DIGITAL AUDIO OUT jacks to the corresponding OPTICAL O or COAXIAL X jack on your amplifier.

3Digital multi-channel sound:

Using your DVD player

Using your remote control

Accessing DVD player features using your remote control buttons

All features of your DVD player can be accessed using the remote control. Some functions work with all types of discs, while some features work only with certain types of discs.

To access DVD features:

1Press the button that corresponds to the operation desired.

2Press the or button to select a menu.

3Press to enter a sub menu or press to return to the previous menu.

4Press the or button to select a sub menu if necessary, then press ENTER to confirm your selection.

The following table specifies the feature operations and the type of discs required for the feature to work.

Button

Operation

 

 

 

Type of disc

 

 

 

 

 

 

 

OPEN/CLOSE

Opens or closes the disc tray.

All

 

 

 

 

 

 

 

PAUSE/STEP

During playback, press to

All

 

pause play.

 

 

 

 

 

Press repeatedly to play

 

 

frame-by-frame.

 

 

 

 

 

 

 

 

SKIP

During playback, press

 

 

DVD

 

 

to go to the next chapter/track

 

 

or press

 

 

to return to the

 

 

 

 

 

beginning of the currently

 

 

playing chapter/track.

 

 

Press briefly twice to step back

 

 

to the previous chapter/track.

 

 

 

 

 

 

 

 

SCAN

During playback, press

DVD

 

repeatedly to select the desired

Audio CD

 

scan speed.

 

 

 

(ACD)

 

DVD discs have four scan

MP3

 

speeds.

 

 

 

 

MP3 and audio CD discs have three scan speeds.

8

www.insignia-products.com