NS-27RTV 27-inch Color TV

Using your television

Notes

• If you select a channel with no

 

broadcast signal, the sound is

 

automatically muted.

 

• If a station you are viewing stops

 

broadcasting, the television

 

automatically shuts itself off after 15

 

minutes.

 

 

To use the television:

1Press POWER to turn on the television.

2Adjust the volume level by pressing VOL + or –. The volume level is indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.

3Set the TV/CABLE menu option to the appropriate position (see “Selecting TV or cable” on page 9).

4Press the direct channel selection buttons to select the channel.

Selecting analog channels

Channels

Press

 

 

1-9

Press 0 twice, then 1-9 as needed.

 

Example: to select channel 2, press

 

0 0 2.

 

 

10-99

Press 0, then the remaining 2 digits.

 

Example, to select channel 12, press

 

0 1 2.

 

 

100-125

Press the 3 digits in order. Example,

 

to select channel 120, press 1 2 0.

 

 

Selecting digital channels

Viewing information

To view program information:

1Press -/DISPLAYto display the current information on the screen.

When the television receives a digital signal, the digital information appears:

•Broadcast program name

•Station name

•Remaining time

•Audio language

•Program name

•V-Chip rating

•V-Chip mark

•Closed caption mark

When the television receives an analog signal, -/DISPLAYshows only analog information.

2Press -/DISPLAYagain. The analog information appears.

•Clock

•Channel number or video mode selected

•Channel label (if preset)

•Stereo or SAP (second audio program) audio status

•Content rating

•On timer, Off timer, Sleep time (if preset)

•Picture size

3Press -/DISPLAYagain to clear the call display.

Viewing the previous channel

The QUICK VIEW button allows you to go back to the last channel viewed. Press QUICK VIEW again to return to the last channel you were watching.

Press the first 3 digits, then press the –/DISPLAYbutton, followed by the remaining 3 digits.

Example, to select channel 015-001, press 0 1 5

– 0 0 1.

Muting the volume

Press MUTE to turn off the sound. The television’s sound is silenced and MUTE appears on the screen. The sound can be switched back on by pressing this button again or by pressing one of the VOL + or – buttons.

TV Cable

VHF VHF

2-13 2-13

UHF STD/HRC/IRC

14-69 14-36 (A) (W)

37-59 (AA) (WW)

60-85 (AAA) (ZZZ)

86-94 (86) (94)

95-99 (A-5) (A-1)

100-125 (100) (125)

01 (5A)

Seeking channels

To seek the next channel:

Press and release CH or . The channel automatically stops at the next channel set into memory.

For proper operation, before seeking channels, they should be set into the memory. See “Memorizing channels” on page 9.

Using sleep

To set the television to turn off after a preset amount of time, press SLEEP on the remote control. The clock counts up ten (10) minutes for each press of the SLEEP button (0h00m, 0h10m, ...1h50m, 2h00m).

After the sleep time is programmed, the display appears briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time is displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to 0h00m.

Setting the V-Chip

An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to TV rating and movie rating if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must set a password.

10

www.insignia-products.com