Insignia NS-27RTV 8

NS-27RTV 27-inch Color TV
Selecting the video input source
Press TV/AV to view a signal from another	Note	When the S-video cord and the video cord
device connected to your television, such as a		are connected to each jack at the same time,
VCR or DVD player. You can select ANT,		the S-video cord takes precedence over the
VIDEO1, VIDEO2 (on the front panel), or		video cord.
COMPONENT depending on which input jacks
COMPONENT depending on which input jacks	Connecting the television to a DVD player or
you used to connect your devices.	Connecting the television to a DVD player or
you used to connect your devices.	satellite receiver
	satellite receiver

Pressing TV/AV on the remote control displays the current signal source (press TV/AV again or 0-3 to change).

Connecting the television to a VCR

To Audio/

Video OUT

Audio/ Video cord (not supplied)

To Audio/

Video IN

Connecting the television to a VCR with an S-Video cord

If you connect a VCR with a S-VIDEO cord to the S-VIDEO IN jack on the rear of the television, you must also connect the audio cords to the AUDIO IN jacks on the rear of the television. The S-VIDEO cord only carries the video signal. The audio signal is separate.

To S-Video	To Audio
OUT	OUT

Audio cord

S-Video(not supplied) cord (not

supplied)

To Audio

	To S-Video	Rear of the TV
	IN	Rear of the TV
	IN

If your DVD player or satellite receiver has an S-Video out jack, connect cords as shown.

	To S-Video	To Audio
	OUT	OUT
	S-Video	Audio cord
	S-Video	(not supplied)
	cord (not	(not supplied)

supplied)

To Audio

To S-Video IN

Connecting the television to a DVD player with component video

If your DVD player has component video out jacks, connect your television to a DVD player using a component video cord. It can greatly enhance picture quality and performance.

To Audio	To Component
OUT	OUT

	Audio	Video cord
	Audio	(not supplied)
	cord (not	(not supplied)
	cord (not
	supplied)

To COMPONENT

Note This television is only capable of displaying 480i interlaced signal when connected to a digital device with component video outputs. If you input a 480p, 720p, or 1080i signal to the component video inputs, COMPONENT is displayed on a black screen. If COMPONENT appears, set the digital device's component output to 480i.