Notes | • The |
| on programs and input sources that |
| have the rating signal. |
| • It may take several minutes to |
| complete the initial |
| • The |
| selectable when the TV receives a |
| digital broadcast using the new rating |
| system. Currently, some stations are |
| still not providing this signal. If the |
| signal is not provided, |
| (DTV) function will not be available. |
| • If you forget the password, contact |
| Customer Service at |
| for assistance. Your original remote |
| control is required. |
| • To avoid forgetting the password, write |
| it down and keep it in a safe place. |
|
|
8Press MENU twice to return to the LOCKS menu, then press or to select
9Press or to select ON. Your settings are now set into memory.
10Press EXIT to return to the normal screen.
Watching a protected show
To watch a program that is blocked by the
1Press MUTE.
Setting a password
To set a password:
1Press MENU. The menu screen appears.
2Press or to select the LOCKS menu.
3Press or to display the password entering mode.
4Select and enter a password (4 digits) using the number buttons
5Enter the same password again to confirm, then press ENTER.
The password is now set and the
Setting the
To set the
1Press MENU. The menu screen appears.
2Press or to select the LOCKS menu.
3Press or to display the password entering mode. Use number buttons
4Press or to select
5Press or to select TV RATING, then press or to display the desired rating.
When you select
rating. Press or to select the desired
rating you want. Press or to select the setting ON or OFF.
6Press or to select MOVIE RATING, then press . The RATING menu appears.
7Press or to select the rating, then press or to select ON or OFF for each rating.
2Enter the password, then press ENTER.
After you enter the password correctly, the protection is temporarily overridden. If the television is turned off, or if the channel is changed, the
Changing the password
To change the password:
1Press MENU. The menu screen appears.
2Press or to select the LOCKS menu.
3Press or to display the password entering mode. Use the number buttons
4Press or to select NEW PASSWORD, then press or .
5Enter a new password using the number buttons
6Enter the same password again to confirm, then press ENTER.
7Press EXIT to return to the normal screen.
Locking channels
With the CH LOCK feature, you can lock specific channels. You cannot tune locked channels unless you clear the setting. You can choose to lock up to 12 television channels.
Note After programming CH LOCK, change the channel before turning off the television. Failure to do so cancels the programming for channels locked using this procedure.
To lock channels:
1Use the number buttons
2Press MENU, then press or to display the LOCKS menu.
3Press or to display the password entering mode.
4Use the number buttons
5Press or to highlight CH LOCK and press or to display the CH LOCK menu.
6Press or to select the following:
•SET– to set the channel as one to be locked, then press ENTER.
•CLEAR– to clear all channels from the list of locked channels, then press ENTER.
11 |